 |
|
 |
| Access Control |
 |
|
|
 |
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Badge reader with read head
and alphanumeric display,
- Badge reader with read head,
display and keypad.
The readers can be installed outdoors,
in which case they have visors. |
|
|
|
|
|
|
|
|
|
|
|
- Magnetic-stripe swipe reader,
- Magnetic-stripe insertion reader,
- motorized magnetic-stripe badge reader
(badge drown it),
- smart card badge reader,
- 19 cm proximity badge reader,
- 50 cm proximity badge reader,
- 70 cm proximity badge reader,
- hands-free badge reader,
6 to 8 m at 50 km per hour,
- 5-digit keypad. |
|
|
|
|
|
|
|
|
|
|
|
The readers are supplied with 12V. |
|
|
|
|
|
|
|
|
|
|
|
Depending on the selected technology, the read head is either built into the terminal (magnetic card) or installed at a distance (proximity, microwave). |
|
|
|
|
|
|
|
|
|
|
|
The terminal controls various types of actuators via relays (electric door strike, electric lock, etc.).
In addition, various contacts can be made available on the terminal to control the door opening or closing sequences. |
|
|
|
|
|
|
|
|
|
|
|
The badge readers can be either wall-mounted (projecting or recessed) or integrated into a post at car or lorry level. |
|
|
 |
|
|
|
|
|
|
|
|
 |
|
|
|
GENIUS
Badges
readers
The GENIUS access control network
supports several types of
badge readers and controllers. |
|
 |
|
|
|
|
|
|
• The Controller:
integrated into the reader or installed at a distance of up to 10 m in a case with a battery-backed 12V power supply.
A controller supports 1 or 2 readers.
The controller enables the reader and central unit to
communicate.
Upon request, the controller contains its own data base and can operate alone in case of communication failure.
Linked to a badge reader, it can be connected on a RJ connection with its own IP address. It communicates on a devote network.
• The badges readers:
The badge readers contain a card to which the following can be connected:
- A 2-line by 16-character alphanumeric display with backlighting.
- A badge read head of the selected technology.
- A 12-key keypad, which is made vandal-resistant
if the reader is installed outdoors.
- Input contacts (detection loop, push-button, presence detector) and output contacts (opening control, signalling, etc).
- A 12V DC power supply.
- Input/output cards:
connected directly to the bus and pro- viding increments of 16 status or control addresses.They are programmed and managed by the central unit.
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
